One Station Service For PCBA OEM\ODM Turnkey Contract Manufacturer

Home / All

News

  • How to Make PCB More Reliable?
    How to Make PCB More Reliable?
    Whether the PCB board is mounted on a water analyzer, spacecraft, or aircraft, the cost of failure can be easily measured. So how can the PCB board be made more reliable? Read on to learn more.

    March 22,2023
  • The Main Factors Affecting the Price of Flexible Printed Circuit Boards Are!
    The Main Factors Affecting the Price of Flexible Printed Circuit Boards Are!
    Cost optimization is an important KRA when designing and manufacturing PCBs. So what are some cost drivers of flexible PCB boards and how to control them? Below is a detailed overview.

    March 15,2023
  • Important PCB Terms for Beginners
    Important PCB Terms for Beginners
    Customers in the electronics industry speak the same language as manufacturers to ensure an accurate representation of design intent, below is a list of important PCB terms.

    March 8,2023
  • What is the Difference Between PCBA and PCB?
    What is the Difference Between PCBA and PCB?
    Both PCB and PCBA are important terms in the electronics industry. In this guide, we'll take a closer look at the definition of PCB, the definition of PCBA, and the differences between these two terms.

    March 1,2023
  • PCB Vias: Understanding Microvia Design
    PCB Vias: Understanding Microvia Design
    To make electrical connections between layers, holes need to be drilled throughout the PCB, these are called plated through holes or vias. Depending on the diameter, pores can be considered micropores.

    February 23,2023
  • Everything You Wanted to Know About PCB Materials
    Everything You Wanted to Know About PCB Materials
    With the rapid development of electronic design, the correct selection of the material for the PCB board will affect the quality of the signal passing through the board. Read on to learn more.

    February 14,2023
  • Three Ways to Get PCB Assembly Done Right
    Three Ways to Get PCB Assembly Done Right
    Circuit boards are in nearly every electronic device you use, but what is the process of PCB assembly? Do you need to submit each section? Read on to learn more about assembling PCBs.

    February 7,2023
  • Ten Golden Rules for PCB Design
    Ten Golden Rules for PCB Design
    This article will describe ten golden rules that electronic design engineers should keep in mind and practice when using design software for PCB layout design and commercial manufacturing.

    January 31,2023
  • Industry Trends in PCB Design
    Industry Trends in PCB Design
    PCB manufacturing is a highly competitive and technology-driven field where it is constantly evolving. Here are some more recent trends.

    January 12,2023
  • 6 Tips for Printed Circuit Board Maintenance
    6 Tips for Printed Circuit Board Maintenance
    More and more chip applications have programs, and engineers will face challenges in various aspects. Below we will share 6 PCB maintenance methods to avoid this challenge.

    January 5,2023
  • How to Repair a PCB Board?
    How to Repair a PCB Board?
    Printed circuit boards can go wrong in a number of different ways. So, how to fix the PCB board? How to repair the PCB board, the following article will answer for you.

    December 21,2022
  • Key Tips for Reliable Rigid-Flex PCB Design
    Key Tips for Reliable Rigid-Flex PCB Design
    Due to the complexity of the rigid-flex board, its design involves a lot of content. Below we briefly describe the key techniques of rigid-flex PCB design to help you understand it better.

    December 14,2022
  • Flex PCB: Flexible Circuit Boards for Compact Devices
    Flex PCB: Flexible Circuit Boards for Compact Devices
    There are several benefits to the design of flexible PCBs, so if you are a techie working on this type of project, read the following in-depth guide on flexible PCBs.

    December 7,2022
  • What Makes Flexible PCB Boards the Best Choice for Satellite Applications?
    What Makes Flexible PCB Boards the Best Choice for Satellite Applications?
    From reduced weight to increased reliability, flex PCBs offer many advantages for satellite applications. Below we introduce the application of flexible PCB boards in satellites in detail.

    December 1,2022
  • Hybrid PCB Assembly - Benefits and Applications Discussed
    Hybrid PCB Assembly - Benefits and Applications Discussed
    Hybrid PCB assembly combines through-hole technology (THT) and surface mount technology (SMT); hence the name. Would you like to learn more about hybrid PCB assembly? Read this article till the end.

    November 23,2022
  • The Importance of PCB Burn-in Testing
    The Importance of PCB Burn-in Testing
    Without inspection and testing, the board will not meet its design requirements. This article discusses one of the most commonly used PCB inspection methods: burn-in testing.

    November 16,2022
  • Future Trends of Circuit Boards
    Future Trends of Circuit Boards
    The continued need for technological advancement and implementation will inevitably require advancements in PCBs. In this post, we'll cover three of the most likely future trends for circuit boards.

    November 8,2022
  • Improve PCB Quality with Uniform Copper Distribution
    Improve PCB Quality with Uniform Copper Distribution
    All printed circuit boards use copper for the core and traces in all layers. Inconsistent distribution of copper in the layer stack can cause many problems such as bending, twisting, and warping.

    November 2,2022
  • Common Flex PCB Surface Finishes
    Common Flex PCB Surface Finishes
    Copper is one of the most important of all the elements that make up a PCB. The following is a detailed introduction to the reasons and benefits of copper in the PCB manufacturing process.

    October 25,2022
  • 10 Tips for PCB Stackup Design
    10 Tips for PCB Stackup Design
    Now the complexity of PCB boards is getting higher and higher. In order to avoid the interference of electrical factors, the signal plane and power plane must be separated, so it involves the design of multi-layer PCB.

    October 18,2022
  • Why Are Multi-layer PCBs Commonly Used?
    Why Are Multi-layer PCBs Commonly Used?
    Due to the versatility of multilayer PCBs, it is widely used in many devices. There are many benefits to using these printed circuit boards. The following is a detailed introduction to the benefits of using multi-layer PCB boards.

    October 10,2022
  • Types of PCB Assembly Processes
    Types of PCB Assembly Processes
    The manufacturing process of assembling a PCB is called the PCB assembly process or PCBA. During this process, the required electronic components are mounted on the PCB. In this article, we will discuss three basic techniques of the PCB assembly process.

    September 29,2022
  • PCB Colors - How To Choose The Color You Need
    PCB Colors - How To Choose The Color You Need
    For the past few years, green has been considered the standard PCB color. With the advent of technology and more innovations, different PCB colors are now also available. This guide will help you understand the basics of PCB board and solder mask colors.

    September 21,2022
  • Why Use Rigid-flex PCBs Instead of Flex PCBs in Electronics Projects?
    Why Use Rigid-flex PCBs Instead of Flex PCBs in Electronics Projects?
    With the ever-increasing demand for small devices, flexible and rigid-flex PCB circuit boards are widely used in PCB manufacturing and assembly, where they are small, fast, and flexible. Ability to do better at optimal levels without breaking.

    September 13,2022
  • Application of Printed Circuit Board in Medical
    Application of Printed Circuit Board in Medical
    PCBs have become critical in the medical field. As technology advances, more and more medical diagnosis and treatment methods have been computerized, which means that medical device PCBs are becoming a standard requirement across the industry.

    September 5,2022
  • How to Clean PCBs?
    How to Clean PCBs?
    Cleaning printed circuit boards is a process as delicate as making them. To prevent damage to the PCB during cleaning, below we will discuss proven PCB cleaning options.

    August 29,2022
  • Common Causes of PCB Failure
    Common Causes of PCB Failure
    There are many reasons why PCBs fail, sometimes even before they are shipped for use. By understanding the causes of PCB failures, you can more easily prevent future failures and enjoy more efficient PCB testing. The following are the most common causes of PCB failure.

    August 23,2022
  • 3 Key Tips for Extending the Life of Your Printed Circuit Board
    3 Key Tips for Extending the Life of Your Printed Circuit Board
    As you probably know by now, printed circuit boards don't last forever. Not even the very expensive ones in industrial equipment. But did you know you can extend the life of your circuit board?

    August 16,2022
  • A Feasible Method to Determine the Number of PCB Layers
    A Feasible Method to Determine the Number of PCB Layers
    Would you like to verify your PCB layer count, is it a 4-layer board as required or just a double-sided board? Is there any way to quickly verify without going to the workstation? Listed below are several easy-to-use methods for determining the number of layers in a PCB.

    August 10,2022
  • How Multilayer PCBs are Made?
    How Multilayer PCBs are Made?
    Before you buy a PCB, you should know how to integrate the board with the elements of your application. While there is no final solution for everyone to follow, here is a brief overview of how most manufacturers implement multilayer PCBs.

    August 2,2022